Go to Launchpad or Application Folder and click on the Cisco logo to start the application. Note: Be sure to answer Yes to the software agreement. When prompted for credential, enter your Mac login name and password and click Install Software. Except that the VPN client (when fetching IP from the 192.168.15.0/24 pool) only sets up route to 192.168.13.0/24 via the VPN link. Follow the on screen instruction to install Cisco VPN. The SA540 itself has a site2site ipsec setup to 192.168.2.0/24Īll traffic works. * 192.168.14.0/24 SSH access for servers (very relevant for VPN) Relevant for VPN)ġ92.168.80.0/24 HTTPD traffic midend, facing the pound http/https frontend (not relevant for VPN)ġ92.180.100.0/24 2.4GHz wireless net, SIP traffic (not relevant for VPN) * 192.168.9.0/24 Physical servers 1 (actually subnetted in /30 blocks. We choose the IPSEC protocol stack because of recent vulnerabilities found in pptpd VPNs and because it is supported on all recent operating systems by default. It has a detailed explanation with every step. * 192.168.8.0/24 VMWare servers 2 (relevant for VPN) This is a guide on setting up an IPSEC VPN server on CentOS 7 using StrongSwan as the IPsec server and for authentication. In short, there's a single WAN adress, the LAN port is 192.168.13.3/24 (old router was on 1), the layer3 switch on 192.168.13.2.īehind the 192.168.13.2 ip, there are several subnets:ġ92.168.4.0/24 for cabled clients (not relevant for VPN)ġ92.168.12.0/24 for wireless clients (not relevant for VPN)ġ92.168.6.0/24 for VMWare kernel ports, and iSCSI traffic For my setup, I have the SA540 facing the internet on WAN, I'll be migrating servers over to the DMZ (having used a two zone setup previously), and on the lan side, there's a Layer 3 switch separating the SA540 from the internal servers (and workstations).
0 kommentar(er)
